Product features ◆ We used 4 6L 6G in the output pipe, 2 each 2C 51 for the input pipe and the driver pipe. In the output stage, 6L6G of each channel is push-pull driven by class AB operation, and high output of 15 W + 15 W is realized. Moreover, by adopting the SRPP circuit by the bi-triode in the first stage, it reduces the distortion rate, reproduces the treble with a wide dynamic range instantaneous power and a gentle warm tone. ◆ Amp control is only 3 points of power switch, volume, selector. This is the result of carefully selecting only the parts necessary for reproducing the original tone of the sound source at a high level without adding extra parts. There is a sound that echoes because it is a simple circuit configuration. The selector is also equipped with switching to iPod, you can easily connect to iPhone and iPod. ◆ Adopting a large toroidal transformer in the power block that supports a gentle and warm sound. The toroidal type is low noise and powerful, making it possible to always supply stable power over the entire playback frequency. ◆ To raise the quality of the product to the various parts making up the circuit, use only high quality items carefully selected. Uncompromising parts composition will put life in sound.
- ● Output stage circuit type: Class AB / push-pull drive / ● Vacuum tube used: 6L6G × 4/2C51 × 4
- ● Rated output: 15 W + 15 W (8 Ω) / 15 W + 15 W (4 Ω) / ● Total harmonic distortion ratio: 0.1% or less (1 kHz) / ● Frequency response: 20 Hz to 40000 Hz (-1 dB) / ● S / N ratio: 94 dB / ● Input terminal: RCA terminal (4 stereo) / ● Input sensitivity: 300 mV / ● Load impedance: 8 Ω / 4 Ω
- ※ ● Power supply voltage: AC 100 V (50/60 Hz) / ● Rated power consumption: 120 W / ● Fuse: 250 VAC T 2.5 A / ● Body size: (W) 330 mm × (H) 186 mm × (D) 385 mm / ● Body weight: Approx 18 kg
- Accessories: ● Power cable (1.5 m) / ● Driver / ● Japanese instruction manual
- Japanese instruction manual URL (PDF): http://www.radius.co.jp/manual/vt11.pdf